This version of Apache includes changes allowing it to run on IBM's EBCDIC-based TPF (Transaction Processing Facility) operating system.
Unless otherwise noted TPF version 4.1 PUT09 is required. 

Refer to install-tpf.html for step-by-step installation instructions. 

This port builds upon the EBCDIC changes previously made to Apache. 

Components/modules tested on TPF:

• alloc.c 
• ap_base64.c 
• ap_checkpass.c 
• ap_cpystrn.c 
• ap_ebcdic.c 
• ap_fnmatch.c 
• ap_md5c.c 
• ap_sha1.c 
• ap_signal.c 
• ap_slack.c 
• ap_snprintf.c 
• buff.c 
• buildmark.c 
• gen_test.char.c 
• gen_uri_delims.c 
• htpasswd.c (requires PUT10) 
• http_config.c 
• http_core.c 
• http_log.c 
• http_main.c 
• http_protocol.c 
• http_request.c 
• http_vhost.c 
• logresolve.c (requires PUT10) 
• mod_access.c (Use of mod_access directives "allow from" & "deny from" with host names (verses ip addresses) requires PUT10) 
• mod_actions.c 
• mod_alias.c 
• mod_asis.c 
• mod_auth.c 
• mod_auth_anon.c 
• mod_autoindex.c 
• mod_cern_meta.c 
• mod_cgi.c (requires PUT10) 
• mod_digest.c 
• mod_dir.c 
• mod_env.c 
• mod_example.c 
• mod_expires.c 
• mod_headers.c 
• mod_imap.c 
• mod_include.c (CGI execution requires TPF version 4.1 PUT10) 
• mod_info.c 
• mod_log_agent.c 
• mod_log_config.c 
• mod_log_referer.c 
• mod_mime.c 
• mod_mime_magic.c 
• mod_negotiation.c 
• mod_put.c (third party module) 
• mod_proxy.c 
• mod_setenvif.c 
• mod_speling.c 
• mod_status.c 
• mod_tpf_shm_static.c (third party module, requires PUT10) 
• mod_unique_id.c (requires PUT10) 
• mod_userdir.c 
• mod_usertrack.c 
• os.c 
• os-inline.c 
• proxy_cache.c 
• proxy_connect.c 
• proxy_ftp.c 
• proxy_http.c 
• proxy_util.c 
• regular expression parser 
• regular expression test tool (requires PUT10) 
• rfc1413.c 
• rotatelogs.c (requires PUT10; if PJ27214 implemented be sure to apply PJ28367) 
• syslog (requires PUT13; see install and usage instructions) 
• util.c 
• util_date.c 
• util_md5.c 
• util_script.c 
• util_uri.c 

Components/modules not yet supported on TPF:

• htdigest.c 
• lib/expat-lite 
• lib/sdbm 
• mod_auth_digest.c 
• mod_rewrite.c 
• mod_vhost_alias.c 

Components/modules that don't apply or that probably won't ever be available on TPF:

• ab.c 
• ap_getpass.c 
• mod_auth_db.c 
• mod_auth_dbm.c 
• mod_auth_db.module 
• mod_mmap_static.c 
• mod_so.c 
• suexec.c 

The following is a very simple example of a CGI script ("Hello World") and the necessary steps to run it.
Refer to the mod_cgi module for additional information.

Add necessary directives to httpd.conf:

Create the CGI script:

Mark the script as executable:

Create, load, and activate a loadset containing the CGI program (QZZ1xx):

Request the CGI script from a browser:

Overview of Apache's "dash" options:

Apache can be invoked with various options, such as "-f". Some of these options display information about the server or perform syntax checks but they don't actually start the server. These "information only" options are useful with TPF's ZFILE command line feature: -h, -l, -L, -S, -t, -T, -v, and -V.

Another option, -X, is used when actually running the server. It is passed to Apache through the ZINET XPARM field since ZINET is the only way to start the server on TPF.

A third group of options apply to both the informational displays (ZFILE) and running the server (ZINET XPARM): -d, -D and -f.

The rest of Apache's options are either not applicable or are not supported on TPF.

Using dash options requires PJ27277 which shipped on PUT13.

Table of supported Apache options

Setup for ZFILE examples

ZFILE example 1

ZFILE example 2

ZINET XPARM example

Syslog overview:

The syslog daemon is a server process that provides a message logging facility for application and system processes. It can be used to write messages to log files or to tapes. See TPF Transmission Control Protocol/Internet Protocol for detailed information about using the syslog daemon on TPF: http://www.ibm.com/tpf/pubs/tpfpubs.htm. And see the Apache ErrorLog directive documentation for details on how to use syslog with Apache.

Syslog capabilities were added with PJ27214 which shipped with PUT13. You must follow the syslog specific installation instructions in order to have the option of using syslog with Apache.

Tips on using syslog with your Apache error log:

This section provides some tips on using syslog with Apache. It is not meant to replace the syslog documentation in the TPF TCP/IP publication.

• The syslog daemon will not create files. If you are logging to a file (as specified in the syslog.conf configuration file) that file must already exist and have permissions that allow the syslog daemon to write to it.
• You must restart the syslog daemon for it to recognize changes to its syslog.conf configuration file.
• The syslog daemon must be active prior to starting Apache.
• To indicate you want to use syslog with your Apache error log add the following directive to your httpd.conf file: "ErrorLog syslog:facility" where facility is "local0" through "local7".
• Apache will default the facility to "local7" if you omit the facility name from the ErrorLog directive (that is "ErrorLog syslog").
• The syslog facility name must be one that is recognized by both Apache and the syslog.h header file. The facility names "local0" through "local7" are explicitly set aside for your use.
• Although "local0" through "local7" are recommended user facility names, here is the complete list of names recognized by both Apache and TPF's syslog.h: auth, cron, daemon, kern, local0, local1, local2, local3, local4, local5, local6, local7, lpr, mail, news, syslog, user, and uucp.
• You won't see the normal Apache startup/shutdown messages when you use syslog with your Apache error log.
• Syslog does not support TCP/IP Offload devices (ZCLAW)

Changes made due to differences between UNIX and TPF's process models:

• Signals: On TPF a signal that is sent to a process remains unhandled until the process explicitly requests that signals be handled using the tpf_process_signals() function. Additionally, the default action for an alarm on TPF is to take an OPR-7777 dump and exit. (On UNIX the default is the equivalent of exit() with no dump taken.) These differences necessitated a few modifications: 
• 
   
  • bypass the use of ap_block_alarms() & ap_unblock_alarms() 
  • add tpf_process_signals() calls 
  • add select() calls to prevent blocking. 

Find that function...

EBCDIC changes:

Miscellaneous, minor changes: